Geotechnical Solutions
Protection/ Separation for Pavement Structure
Separating between the layers of filling and the natural subsoil has proven to be an effective method from time immemorial. Using woven
and non-woven geotechnic sheets enables improvement of engineering function…
Stabilizing Pavement using Perforated Beehive-Structure Load Supports
The method for stabilizing pavement using perforated beehive structures prevents structural bearing capacity failure and/ or cutting of the natural ground. With this method, the filling materials are stabilized within cells that allow for load distribution…
Reinforcement of Asphalt Structure
Flaws and cracks are caused to the asphalt as a result of exhaustion (“reflective cracking”), aging, cyclical temperature change, and traffic loads. These phenomena can be prevented by spreading …
Lining Clay-Containing Infrastructure
Use of geomembranes to seal clay allows for the preservation of a fixed moisture content in the clay, and thereby prevents the clay from swelling. Lining the subsoil is done by processing the clay…
Embankments and Supporting Walls – Reinforced Soil
Using Geogrid geotechnical screens. Horizontal spread of various types of geotextiles and geogrid screens in the cross-section of the embankment creates a reinforced soil structure…
Bridging over Sinkholes
High-tensile mats and geogrids made of “superfibers” such as Armid and PVA are notable for their exceptional engineering features. Using these special products makes it possible to meet complex civil engineering challenges.
Lining of Water Ponds
Lining ponds with synthetic lining sheets (Geomembranes) enables the separation of the mass of liquids from the ground. The purpose of the lining is to keep the ground clean and prevent groundwater pollution. In cases where clean water is being stored, the pond lining, using HDPE type sheets, will prevent the loss of precious water…
Lining, Drainage, and Capping of Waste Dumping Sites
Treatment by burial of waste integrates most geosynthetic products – bottom lining and capping of waste dumping sites. Its implementation combines products used for lining, spill drainage, water drainage...
Floating Lids
Floating lids are installed on drinking water reservoirs, treated waste water, and other liquids. Admir supplies and installs floating lids made
of reinforced polypropylene sheets and/ or HDPE sheets…
Lining Fuel Spill Containment Pallets
Storage of petroleum products and hazardous materials demands concern for the complete protection of the environment even under the most extenuating circumstances such as earthquakes, fires, etc. In order to prevent soil or groundwater pollution…
Drainage of Subterranean Structures
Drainage of subterranean structures is an integral part of the lining system. An effective and reliable drainage system prevents the penetration of water and the development of hydrostatic pressures. Multi-layered drainage mats create…
Lining of Tunnels
Lining and drainage of tunnels using sheets is necessary to preserve the quality and safety of use of the tunnels as well as the integrity of the concrete and the electrical and control systems. The technology includes using stilts…
Prevention of Alluvium/ Erosion – Neoweb Beehive Patterns
Erosion caused by rain damages engineered structures such as gradients and embankments. The erosion causes ditches of alluvium and undermining that, in certain cases, can threaten the general stability of the engineered structure.
Prevention of Rockfall
RFN netting, manufactured by Italy’s Maccaferri, are designed to prevent rockfalls on steep gradients built into fissured rock. The RFN system is comprised of netting woven in a double twist that integrates strength and flexibility…
Protection of Riverbanks and Shorelines
Control over the flow of water in riverbeds, channels, and other watered areas is vital to preserve the infrastructure and environment. Using gabions and mattresses at various sections of the flow…
Maritime Works – Protection of Coastal Cliffs
The Geotube® geotechnical sleeve, made of woven sheets, allows use the outstanding mechanical and hydraulic features of woven sheets. Using the geotechnical sleeve enables the tackling of complex challenges in maritime works…
Acceleration of Consolidation – Vertical Drains
The process of acceleration consolidation by inserting vertical drains into the ground is considered advanced technology in the field of ground engineering. Insertion of the drains to a depth of 35m into water-saturated muddy or clay-containing soil is designed…
Steel Fibers in Concrete
Integration of steel fibers as a supplemental reinforcement of sprayed concrete in tunnels prevents the need for expensive, malleable, and complicated molds, and thus enables precious time to be saved…
Rock Bolts
Rock bolts/ soil nails are a steel/ aluminum/ plastic element whose purpose is to anchor and stabilize rock/ soil when excavating a tunnel/ gradient.The bolt/ nail transfers the weight of the unstable body from the active area via friction…
| Web production: |
|
|
|